DO NOT APPLY IN DIRECT SUNLIGHT. Shake well Apply on a clean surface. If

surface is not clean, remove oxidation and scratches with appropriate cleaners or

compounds, then using an orbital buffer, high speed buffer, or by hand apply a coat of

Insulator m. If by hand: dampen cloth or sponge (not wet), rub in well to remove any

light oxidation, let dry to haze and buff to a high gloss finish. With orbital buffer: pour

PC-m on bonnet on machine and then work well into paint surface, let dry tohaze. With

anew clean bonnet buff to a high shine. With high speed polisher: apply to surface spread

with buffer over one-half panel, buff wet. Ease pressure on buffer when product begins to

dry and burnish to a high luster. NOTE: It is important to maintain a uniform film over

the surface when applyrng.

CLASS II PRODACTS

REMOW PAINT AND PROVIDE A PROTECTIVE COATING

PRODUCT: REVIWR.32501

Reviver by far is still our #L selling wax. Reviver is a one-step cleaner and wax which

contains specially formulated cleaners which make short work of light to medium

oxidation.. Easily removes dulling road film with a blend of camauba and other fine

import and domestic waxes. It leaves a long lasting, lusftous, paste wax type finish. These

wixes combined coat the surface and create a water repellent, detergent resistant "show

room" finish. Reviver combines these superb cleaners and blended waxes in a

scientifically formulated gel. This process produces easy-on, easy-off application which is

ideal for any used car or new car operation. Tested and safe for all domestic and imported

automotive finishes. Reviver save you time by providing an efficient "one- step" cleaning

and waxing operation. No topping wax is required. This time savings, combined with the

economy of 60 or more cars per gallon, really makes Reviver a money saver.

APPLICATION:

Apply on to cloth or sponge and spread. Buff by hand or machine. Do not apply directly to

finish.

PRODUCT: CARNAUBA PLUS, CP-OI

Carnauba Plus was developed as a "one-step" heavy hitting cleaner wax cornbination. It

is a high tech carnauba wax, designed for all types of paint finishes. Carnauba Plus leaves

a hard, dry; glossy, glass like finish free of wheel marks, sfreaks, swirls or blemishes.

APPLICATION:

Best results achieved with high speed potsher. Apply to pad, spread on surface and polish

in to a high luster. By hand apply with wax sponge or orbital, allow time to dry, wipe off

with clean towel.

PRODUCT: PHASE II,3 1801

Phase II is the one-step cream wax that is in "phase" with today's painted finishes. Phase

tr is a professional formulation that contains polymers and co-polymers which produce a

deep, lustrous shine with excellent water beading and detergent resistant characteristics.

Fhase II buffs with ease without leaving swirls, streaks or smears. The ultimate one-step

cream wax that leaves a long lasting, protective finish thatresists the damaging effects of

water, sun, salt, air pollutants and detergent washings. Phase II also contains mild

cleaners and color brighteners which restore deep color and leave acLear, mirror-like

depth finish. Brightens dull surfaces without the use of harsh abrasives and resists wax

build-up.

Phase tr has a very fast buffing time. It buffs in about half the time of conventional cream

wax products. Cleans, brightens and protects in one easy operation. Phase II was designed

and formulated for hand or machine use to remove compound scratches, buffer marks,

minor imperfections and to fill cobweb or hairline cracks. Phase [I is a non-abrasive

cream wax that is safe for all fypes of paint finishes.

APPLICATION:

Shake well before using. For hand application, apply Phase II with a dispenser bottle to

clean cloth or sponge and rub into finish well. Let dry to haze atdwipe to high luster. For

machine application, apply Phase tr with a dispensing bottle to clean cloth or sponge.

Work only small sections by spreading Phase tr. Buff while wet to a high luster. NOTE:

Do not apply in direct sunlight.

PRODUCT: SYNTHETIC CUT CREMB, 32001

Synthetic Cut Creme is a creamy and powerful product that repairs finishes damaged by

water spotting, scratching, chemical etching, acid rain, and other imperfections. There are

no abrasives in Synthetic Cut Creme that will scratch the finish, so it is safe for the new

softer base coat/clear coat systems. In addition, Synthetic Cut Creme takes care of new

car finish blemishes, fallout, used car oxidation, and lacquers or enamels. Synthetic Cut

Creme's, synthetic cutters will clean even the worst of finishes while added brighteners

bring up the shine to a high, making it a perfect one-step application ready for a top

protection. It contains no waxes or abrasives.

APPLICATION:

Shake well before using. Work a small section at a time. For best results should be

applied with an orbital polisher or high-speed buffer. For orbital machine use: Apply

Synthetic Cut Creme to pad, turn on polisher and spread liquid over the finish. When dry,

buff to a high luster with a clean pad. For high-speed buffer use: Apply Synthetic Cut

Creme directly to finish. Work only small sections by spreading liquid with a damp towel

or sponge. Buff to a high luster while wet after either operation apply Film (Polish)

Clearer with orbital or high-speed and then top with finish protection or apply Phase II as

a one-step operation.

CI.ASS III PRODUCTS:

REMOVES PAINT

PRODUCT: RED BALL COMPOUND. 32801

Red Ball Compound has been formulated in a gel form. This consistency is important

because it makes the application on all painted surfaces quick and even. Red Ball

Compound's gentleness on clean coats and ease in handling oxidation makes it the most

versatile of all compounds. Not only does it smooth over orange peel and remove

overspray in an instant, it does this without scratching. Red Bail Compound has little grit;

no silicone, or wrrx. This product contains ingredients powerful enough to take the place

of a number of compounds. Red Ball Compound is so versatile that it can be used anytime

on any surface. If you could only have one heavy duty cleaner or one cuffing compound,

Red Ball Compound would be the professional's choice.

APPLICATION:

Apply Red Ball Compound by sponge, rag or polish dispenser to a small area and on a

cool finish. Use a high-speed buffer. Apply medium pressure, using overlapping

movements. As Red Ball Compound is being used up and begins to dry, decrease the

pressure on the buffer and burnish to a high gloss. Inspect the surface. Repeat the

procedure if desired effect has not been achieved. Top with desired paint protection.

PRODUCT: 600 CUT COMPOUND, 32601

ce, creamy machine cleaner designed to remove

the most stubborn oxidation, orange peel, over spray, surface scratches, bug spots and

heavy road filth. 600 Cut Compound has been improved so that it can be used on the most

delicate base coat/clear coat finishes without worry of scratching. 600 Cut Compound

will not load pad or dull finish like heavy paste compounds. It cuts like the pastes, but

develops a high gloss finish ready for topping coat 600 Cut Compound contains no

silicones or waxes.

APPI,ICATION:

For excellent results, apply with dispenser bottle over half panel section. Continue to buff

until desired finish is obtained. Buff while wet then ease pressure and burnish to a high

gloss. Top with desired paint protection.

PRODUCT: SYNTHETIC CUT CREME. 32001

Synthetic Cut Creme is a creamy and powerful product that repairs finishes damaged by

water spotting, scratching, chemical etching, acid rain and other imperfections. There are

no abrasives in Synthetic Cut Creme that will scratch the finish, so it is safe for the new softer base coat/clear coat systems. In addition, Synthetic Cut Creme takes care of new

car finish blemishes, fallout, used car oxidation, and lacquers or enamels.

The New Style Foam Pad is the only foam pad on the market that comes with a recessed Velcro backing and fits 'v Velcro Backing Plate. With competitors foam pads you have to throw away the backing plate along with the pad. That's expensive! And removing the plate wastes valuable time. With the New Style Foam Pad ,you just off the pad and you're ready to attach another.